Discover jobs
Job Search
drywall finisher Verified
Posted on April 29, 2024 by Employer details M.S. Gill Painting Inc.
Job details
Education: Secondary (high) school graduation certificate. Tasks: Instruct apprentices. Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cure freshly plastered surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install exterior and interior steel studs. Install vapour barriers and thermal and sound insulation. Work conditions and physical capabilities: Bending, crouching, kneeling. Physically demanding. Screening questions: Are you currently legally able to work in Canada?. Do you have previous experience in this field of employment?. Experience: 1 year to less than 2 years.- LocationEdmonton, AB
- Salary$30.00HOUR hourly / 30 hours per week
- Terms of employment Permanent employmentFull time
- Start date Starts as soon as possible
- vacancies 5 vacancies
- Verified
- Source Job Bank #2898024
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 year to less than 2 years
Responsibilities
Tasks
- Instruct apprentices
- Apply, level and smooth coats of plaster
- Clean and prepare surfaces
- Cure freshly plastered surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install exterior and interior steel studs
- Install vapour barriers and thermal and sound insulation
Additional information
Work conditions and physical capabilities
- Bending, crouching, kneeling
- Physically demanding
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-05-31
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: